Our Top 10 Recommendations for Crown Power Amplifiers

Up-to-date pricing and reviews for Crown power amplifiers on the market

SaleBestseller No. 1

Class D amp with Crown ultra-efficient drive Core technology weighs less than 11 lb. (5 kg)
Higher DSP capabilities: more control; has band pass filter per channel
Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
Selectable input sensitivity; 1.4VRMS and .775VRMS options so that amp can be driven At full power
Set sleep mode after specified time without having to press a button; Security setting disables menu buttons; menu locked/unlocked by entering combination

SaleBestseller No. 2

Stereo/parallel/bridge-mono mode
User selectable input sensitivity - 0. 775V and 1. 4V
Electronically balanced RCA & XLR inputs; binding post and Speak on outputs
Efficient forced-air cooling prevents excessive thermal buildup
Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel

Bestseller No. 3

Peak x Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
3 User-defined fan mode controls – normal, early and full speed – for matching fan performance to a specific application
Integrated cast-aluminum handles for easy handling and enhanced durability
Input: XLR (x2); Output: XLR (x2), Speakon (x2), Binding Post (x2 pair)

Bestseller No. 4

Bestseller No. 5

2 x 2,000 Watts into 2 Ohms; 2 x 1,400 Watts into 4 Ohms; 4,000 Watts into 4 Ohms (bridge mode)
ATR (Accelerated Transient Response) technology for ultimate punch and clarity
Switchable limiters offer maximum output level with reliable overload protection
Detented gain controls for precise setting and matching of sensitivity
Precise Power, Signal and Clip LEDs to monitor performance

Bestseller No. 6

215 watts per channel at 8 ohms, 350 watts per channel at 4 ohms, 1100 watts at 4 ohms bridged
High Performance, Lightweight Class-D amp weighs less than 11 lbs
Integrated PureBand(TM) Crossover System for better performance and control
PeakX(TM) Limiters provide maximum output while protecting your speakers, XLS, 1/4", RCA Inputs provide outstanding flexibility
Configurations Available (±10%):120 VAC 60 Hz, 100 VAC 50/60 Hz, 220 and 240 VAC 50 Hz.

Bestseller No. 7

In stereo mode it produces 150 watts per channel RMS (300 watts per channel peak) into a 4ohm load or 100 watts per channel RMS (200 watts per channel peak) into an 8ohm load.
When driving a 2ohm load, it can produce 250 watts per channel RMS (500 watts per channel peak). When bridged for mono mode, the amplifier produces 500 watts RMS (1000 watts peak) into a 4ohm load and 360 watts RMS (720 watts peak) into an 8-ohm load.
It features an extremely flat 20Hz - 20kHz (+0, -1dB) frequency response with less than 0.05% THD+N and more than 96dB signal-to-noise ratio. Built-in protection circuitry includes full short circuit, open circuit, thermal, ultrasonic, and RF protection.
It also features power on/off muting function to prevent popping in the speakers when power is turned on or off.
There is also a selectable limiter, which serves as a brick wall on volume to prevent high volume levels from driving the amplifier into clipping, which can cause speaker damage.

Bestseller No. 8

Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb
Higher DSP capabilities: More control; has band pass filter per channel
Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power<
Set sleep mode after specified time without having to press a button

Bestseller No. 9

Output Power: 2 x 500W RMS @ 8-Ohm Stereo, 2 x 1000W RMS @ 4-Ohm Stereo, 4000W peak output
XLR and 1/4" TRS input connectors provide great compatibility
Independent DC and thermal overload protection on each channel automatically protects the amplifier and speakers
Efficient dual DC fans prevent excessive thermal buildup
The rugged, heavy duty metal 2U rack mount chassis holds up to touring applications

Bestseller No. 10

Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs
Switch-mode universal power supply
Intuitive front-panel LCD screen for quick, easy configuration
Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting
Up to 20 user defined DSP presets are available